Volkswagen Sharan II

Mileage Blocker for Volkswagen Sharan II

The Volkswagen Sharan II Mileage Blocker is sometimes referred to as an Odometer Blocker, Odometer Stopper, CAN Blocker, Mileage Stopper, Trip Odometer, CAN Filter, and occasionally as a Mileage Correction tool.

This device is compatible with all Volkswagen Sharan II models released since 2010.

Specifications:

• DIY (Do-it-yourself) installation
• Easy operation with multiple key combinations
• Leaves no trace—no soldering or cable cutting required
• No error messages on the speedometer or navigation panel
• Can be turned on and off while driving
• Includes premium-quality plugs and heat-resistant cables
• Multiple modes available for customization
• After removal, the mileage does not increase spontaneously
• Diagnostic tools cannot detect the mileage altered by the Volkswagen Sharan II Mileage Stopper
• Settings are saved unconditionally after being selected
• Speedometer and assistance systems are disabled when in use
• Smooth installation due to mating face and ridges on the connector
• On models from late 2020, activating the device may trigger the engine control light
• Allows for up to 1% deviation in mileage for modes that alter mileage entirely. Mileage details provided are approximations, with slight variations possible.

Activation & Deactivation:

• Press the OK button for 10 seconds to switch modes
• Mode changes are indicated by brief flashes of the turn lights:
  • Mode 1: 1 flash (50% mileage recorded; speed indicator shows half speed, assistance systems disabled)
  • Mode 2: 2 flashes (100% mileage is stopped)
  • Mode 3: 3 flashes (Mileage is counted at 100%)

Once settings are applied, the Volkswagen Sharan II Kilometer Stopper will retain them for future use, so there is no need to adjust them before starting the vehicle again. The device can be activated or deactivated at any time, whether the car is stationary or in motion.

What is the Volkswagen Sharan II Odometer Blocker or Mileage Correction Tool?

The Volkswagen Sharan II Mileage Blocker/Odometer Blocker is designed to prevent mileage from being recorded during performance testing. Available through KM Block, it is crafted using high-quality components. It works seamlessly with both miles and kilometers (km) on the odometer, ensuring efficient operation. Software is written specifically for each vehicle make and model, ensuring flawless performance.

The Mileage Blocker is compatible with diesel, gasoline, Plug-in Hybrid Electric Vehicles (PHEVs), and Electric cars.

Note: We do not sell Mileage Correction tools intended for deceitful purposes. These tools can remove mileage figures from the odometer but are not capable of completely reversing mileage due to multiple data storage units in modern vehicles.

The Volkswagen Sharan II Mileage Blocker allows for easy installation without needing extensive vehicle maintenance knowledge. It plugs between the speedometer and instrument cluster and is operated using pre-set key combinations to toggle between modes.

This unique module can be activated or deactivated at any time, even while driving, allowing you to test your vehicle’s performance in a controlled environment.